Learn
Continue your lesson
Tie every forwarding decision to interface state, Layer 2 state, addressing, routing, and policy.
0/1blocks complete
Block 1 of 1Compare Subnet address · Directed broadcast address · IPv4 prefix length · Default gateway
Current · 11 min
Compare Subnet address · Directed broadcast address · IPv4 prefix length · Default gateway
Continue your lessonReview the concept notes below, then try four related questions.
Concept notes
Subnet address
Identifies the network itself with host bits set to zero.
Directed broadcast address
Targets all IPv4 hosts in a subnet using all host bits.
IPv4 prefix length
States how many leading IPv4 address bits identify the network as in /24.
Default gateway
Receives local host traffic destined beyond the current subnet.
Review the concept notes, then answer four related questions. That is enough for today; more practice is optional.
No setup required
Practice the reasoning here
Write or inspect a small Cisco configuration, name the expected show-command evidence, and explain how a frame or packet crosses it.
- State the expected result before changing or testing anything.
- Name the observation, command, log, or report that would confirm it.
- Explain why the closest alternative does not fit the same requirement.
Your next milestone
Check the whole objective
This unlocks objective 1.6 for recall. The latest checkpoint needs 70% or higher; a lower result puts the lesson back near the front of your timeline.
One lesson at a time.Your block checks prepare you for this milestone. A score of 70% or higher advances the course; finishing a practice session completes your daily goal.