200-301 · IP Services

Configure and verify DHCP client and relay

Objective 4.6 · Configure and verify DHCP client and relay.

1 learning blockNext: about 18 minutes4 key conceptsPreview · not independently reviewed
ProgressNot started0/1 blocks learned and checked
Learn

Continue your lesson

Tie every forwarding decision to interface state, Layer 2 state, addressing, routing, and policy.

0/1blocks complete
Block 1 of 1

Compare DHCP client · IP helper address · DHCP excluded address · DHCP lease

Current · 18 min
Continue your lessonReview the concept notes below, then try four related questions.
Concept notes

DHCP client

Requests and leases IP configuration from a DHCP service.

IP helper address

Configures a Cisco IOS interface command to relay DHCP and other selected UDP broadcasts to a remote server.

DHCP excluded address

Keeps selected addresses from being offered by a local pool.

DHCP lease

Grants address configuration to a client for a limited time.

Your sessionabout 18 minutes

Review the concept notes, then answer four related questions. That is enough for today; more practice is optional.

Optional sources
No setup required

Practice the reasoning here

Write or inspect a small Cisco configuration, name the expected show-command evidence, and explain how a frame or packet crosses it.

  1. State the expected result before changing or testing anything.
  2. Name the observation, command, log, or report that would confirm it.
  3. Explain why the closest alternative does not fit the same requirement.
Your next milestone

Check the whole objective

This unlocks objective 4.6 for recall. The latest checkpoint needs 70% or higher; a lower result puts the lesson back near the front of your timeline.

One lesson at a time.Your block checks prepare you for this milestone. A score of 70% or higher advances the course; finishing a practice session completes your daily goal.
Official blueprint references
Official 200-301 CCNA exam overviewCisco ↗Official CCNA 200-301 v1.1 exam topicsCisco ↗Official CCNA 200-301 v2.0 announcementCisco ↗